Lovol 5 Ton Teeth-manufacture,factory,supplier from China

Lovol TeethLovol teeth are used in 5 ton loader buckets. It is suitable for Lovol's 5-ton full range of models and 5-ton Ensign series models. It has the characteristics of good wear resistance and long service life.Features:High-quality shovel teeth are usually subjected to a special heat treatment process to make them harder, more corrosion-resistant, more wear-resistant, and can be used for a long time in harsh working environments without excessive wear, reducing the frequency of tooth replacement and reducing the cost of use.

  Yunyu 6-ton rear main reducer assemblyThe main reducer components are slender and easy to connect and fix to the swing frame. It consists of wing flange assembly, Yunyu 60 reinforced differential assembly, main and auxiliary bevel gears, main reducer housing, locking nut, oil seal, bearings 31313, 31314, 32018X and other components.The assembly process of the main reducer assembly of Yunyu 60 model requires a high degree of precision:1. Before assembling the main reducer assembly of Yunyu 60 model, thorough preparations should be made.

5 Ton Brake Disc:The brake disc is a component of the 5 ton wheel loader Jincheng axle wheel reducer, which is used in Lovol, Ensign, Degong, Doosan, Shantui and other brand loaders. It has the characteristics of original quality, high efficiency and durability.Product ApplicationsIn all kinds of engineering construction, loaders often need to carry heavy loads and carry out complex operations.

Output flangeIt is the front flange 9F575-24A060102A0 of the transmission output shaft, suitable for a 5-ton LOVOL wheel loader. The inner hole has 19 splines and is fixed to the output shaft. The flange surface has end teeth and 4 bolt holes are used to connect and fix the transmission shaft.The function of the front flange of the gearbox output:The output flange of the loader gearbox is a key connecting component fixed on the gearbox output shaft, and its main function is to transmit power.

 Transmission Output Shaft GearThe shaft gear 9F560-24A060005A0 is suitable as an accessory for the gearbox assembly of the Lovol 5-ton wheel loader. It has 40 teeth on the outer side, 16 splines in the inner hole, a total height of 110 millimeters, and a weight of 12.5 kilograms.Function Of Gearbox Output Shaft GearThe output shaft gear can flexibly adjust the transmission ratio through different gear combinations, thereby expanding the torque and speed variation range of the driving wheels. And achieve reverse driving of the loader.

Lovol Main Transmission AssemblyLovol main reduction is used for 5 ton Lovol drive axle series wheel loaders.

5 Ton Loader Sun GearThe sun gear is matched with the planetary gear and ring gear to achieve different transmission ratios. The sun gear can transmit power input to the planetary wheel, which in turn will output the power to different components. It plays a key role in the shifting process, adjusting the loader's travel speed and output torque to the demands of the job.Product ApplicationsDuring the operation, when the loader needs to carry out different tasks, the combination of the sun gear and other gears can achieve fast shifts and smooth power transmission.

Lovol 5Ton Brake DiscsLovol 5Ton brake discs for 5 ton Lovol series loader models. The use of high-quality metal materials after delicate processing makes it have good wear resistance, toughness, heat dissipation. The product has good braking performance to ensure the safety of the loader in emergency situations.The Application Of The Product：The products are widely used in construction sites, mines, road construction, etc. Whether loading material, leveling a site or transporting short distances, the brake discs function reliably.

 Ring Gear Assy ZL6TonZL6Ton ring gear assembly is a part of the wheel loader drive axle wheel side reducer. It is a split ring gear assembly, with a support of 57 teeth and a ring gear of 69 teeth.

Lovol Variable Speed Control ValveThe variable speed control valve is used for the Lovol 9F560 loader. Control the working state of the transmission by adjusting the flow rate and pressure of hydraulic oil.

Yunyu 3Ton Rear Gear PairThe Gear Pair is a component of the main reducer assembly, mainly used for deceleration and power transmission. Crown teeth, also known as master slave drive bevel gears or differential active passive gears, are usually divided into active and passive parts. They achieve motion and power transmission between two intersecting shafts through meshing transmission.Company Service CapabilityCompany service personnel quickly allocate goods, inspect, package, and label based on customer order content.

Yunyu 6Ton Master-Driven Spiral Bevel GearYunyu 6Ton spiral bevel gear, 9:38 teeth, used for construction machinery loaders, Yunyu 6Ton front drive axle main reducer assembly components.The Advantages Of Yunyu 6TonSpiral Bevel Gearadvantages are high transmission efficiency, large load-bearing capacity and large transmission ratio. The force is transmitted through the meshing of the teeth, so that the pressure between the gears gradually increases. This meshing method has the characteristics of high torque, low speed and large transmission ratio.

Lovol 5Ton Planetary Wheel Carrier AssemblyLovol 5Ton planetary wheel carrier assembly is an important part of the loader wheel side reducer assembly, which is composed of planetary wheel carrier, planetary wheel, planetary wheel axle (resized head, steel ball), planetary wheel gasket, etc. For Lovol 5 ton loader series.Product PerformanceThe planetary gear carrier assembly has a precise transmission ratio, which can efficiently transmit power and improve the work efficiency of the equipment.

Transmission Output ShaftThe output shaft 9F560-24A06001B0 is the core component of the gearbox assembly of the Lovol 5-ton loader, with 19 splines at both ends. One end is connected to the front output flange, and the other end is connected to the rear output flange. There are 16 spline curves in the middle. The output shaft is the shaft responsible for outputting power in the gearbox.

Lovol Master And Driven Spiral Bevel GearIt is the front axle main reducer assembly component of the 6-ton and 7-ton Lovol FL968/FL970/FL975 wheel loaders. During operation, it can reduce the speed, increase torque, increase power and improve work efficiency.

LOVOL Gearbox AssemblyThe function of the gearbox(1) Change the transmission ratio between the diesel engine and the wheels, so as to change the speed and traction of the loader to adapt to the loadingthe need for carrier aircraft operation and driving;(2) Make the loader drive backwards, because the engine has only one direction of rotation, and the only way to achieve forward and backward is to rely ongearbox.(3) It can cut off the power transmitted to the traveling device, so that the diesel engine can not transmit the power to the traveling device in the running state.It is convenient for

7-Ton Front Axle Final Reducer AssemblyLovol 7-ton main reducer assembly is suitable for wheel loaders FL968 FL970 FL975 axle accessories, including angle tooth nuts, front axle flange assembly, Lovol 7-ton front main reducer casing, 7-ton front differential assembly into, master and driven spiral bevel gear.Company Advantages：1. Ori  ginal satisfactory parts, host helping products.2. Adopting excessive fine steel, wear-resisting and anti-manufacturing, prolonging the use of time.3. Smooth running, low noise, excessive reliability.4. Factory shop, aid processing customization.5.

Lovol Casing Nut9F662 locking nut is applied to the wheel reducer of Lovol loader. Its tight design can tightly fit with the threads of the half shaft sleeve and the output end of the transmission system, forming a good locking effect. During installation, special tools should be used to tighten according to the specified values to ensure that the locking nut can reliably fix the half shaft sleeve.Application Of The ProductThe main function of the locking nut is to fix and lock the half shaft sleeve. During the operation of the loader, it will withstand huge impact forces and torques.

7 Tons Lovol Lock Nut9G670 casing nut is used on Lovol 6 tons and is a component of the loader wheel. On the 7-ton wheel loader FL966 FL968 FL970 FL976 transaxle casing, it is called a casing nut or a locking nut..Application Of Casing NutsUsed to fix the inner ring gear on the shaft sleeves at both ends of the drive axle. In order to prevent the inner ring gear and other components from loosening, the locking nut uses high-strength and high-wear-resistant materials to improve the durability and locking performance of the nut and increase Locking effect.

7 Ton Swing FrameThe swing axle is applied to the 9G670 wheel loader, and the rear drive axle is installed on the swing frame, so that the rear axle can float up and down around the hinge point, and swing relative to the frame with the subframe pin as the axis. This is a measure of shock absorption and increasing the lateral stability of the loader. Effectively prevent damage to the loader frame and other critical components.

Lovol Loader End CapsThe 7-ton Lovol wheel end cover is a loader wheel side reducer assembly component. It helps maintain pressure balance inside the device and prevents too high or too low internal pressure from affecting the performance of the device. It can play a certain sealing role, prevent the leakage of lubricating oil and other liquids, and ensure the normal lubrication and operation of the equipment. It prevents dust, debris, etc.

JC5TonDifferential AssemblyJC differential assembly is the internal part of the main transmission assembly of the loader, which is used in 5 ton Lovol bridge, JC bridge loader. The main function is to adjust the vehicle when turning, the left and right wheels rotate at different speeds, so as to ensure the stability and handling of the vehicle.Corporate ServicesWe are customer-centric and provide multi-faceted quality services. Professionals are ready to answer questions and deal with problems for customers to ensure that customer needs are responded to in a timely manner.

XCMG 7-Ton Loader Planetary Carrier Planetary WheelXCMG 7-ton loader planet carrier planetary gear DA1210V111.1-2 has 28 teeth, a height of 75mm, and an inner diameter of 74.5mm. It is a key component of the planet carrier assembly. Rotates around the axis of rotation of the sun gear. In the planet carrier assembly of the loader, the planet wheels are connected to the sun gear through the internal meshing ring gear, receive the power from the sun wheel, and transmit it to other parts of the planet carrier, ultimately driving the wheels to run.

7Ton Lovol Differential AssyThe differential assembly is the front drive axle final reducer assembly attachment of LovoL 7 ton construction machinery wheel loader, which is composed of differential housing, half shaft gear, bevel gear, cross shaft, etc. For FL966 FL968 FL970 FL975 FL976 drive axle final drive reducer assembly accessories.Differential Assembly  ApplicationsThe differential assembly automatically adjusts the rotational speed of the wheels according to the different resistance encountered by each wheel.