LOVOL Gearbox Assembly-manufacture,factory,supplier from China

LOVOL Gearbox AssemblyThe function of the gearbox(1) Change the transmission ratio between the diesel engine and the wheels, so as to change the speed and traction of the loader to adapt to the loadingthe need for carrier aircraft operation and driving;(2) Make the loader drive backwards, because the engine has only one direction of rotation, and the only way to achieve forward and backward is to rely ongearbox.(3) It can cut off the power transmitted to the traveling device, so that the diesel engine can not transmit the power to the traveling device in the running state.It is convenient for

Output flangeIt is the front flange 9F575-24A060102A0 of the transmission output shaft, suitable for a 5-ton LOVOL wheel loader. The inner hole has 19 splines and is fixed to the output shaft. The flange surface has end teeth and 4 bolt holes are used to connect and fix the transmission shaft.The function of the front flange of the gearbox output:The output flange of the loader gearbox is a key connecting component fixed on the gearbox output shaft, and its main function is to transmit power.

Transmission Output ShaftThe output shaft 9F560-24A06001B0 is the core component of the gearbox assembly of the Lovol 5-ton loader, with 19 splines at both ends. One end is connected to the front output flange, and the other end is connected to the rear output flange. There are 16 spline curves in the middle. The output shaft is the shaft responsible for outputting power in the gearbox.

  Yunyu 6-ton rear main reducer assemblyThe main reducer components are slender and easy to connect and fix to the swing frame. It consists of wing flange assembly, Yunyu 60 reinforced differential assembly, main and auxiliary bevel gears, main reducer housing, locking nut, oil seal, bearings 31313, 31314, 32018X and other components.The assembly process of the main reducer assembly of Yunyu 60 model requires a high degree of precision:1. Before assembling the main reducer assembly of Yunyu 60 model, thorough preparations should be made.

 Transmission Output Shaft GearThe shaft gear 9F560-24A060005A0 is suitable as an accessory for the gearbox assembly of the Lovol 5-ton wheel loader. It has 40 teeth on the outer side, 16 splines in the inner hole, a total height of 110 millimeters, and a weight of 12.5 kilograms.Function Of Gearbox Output Shaft GearThe output shaft gear can flexibly adjust the transmission ratio through different gear combinations, thereby expanding the torque and speed variation range of the driving wheels. And achieve reverse driving of the loader.

Ensign Drive Shaft50 Ensign drive shaft is part of the universal drive of the loader and is installed between the gearbox and the drive axle.

Lovol Variable Speed Control ValveThe variable speed control valve is used for the Lovol 9F560 loader. Control the working state of the transmission by adjusting the flow rate and pressure of hydraulic oil.

7Ton Lovol Differential AssyThe differential assembly is the front drive axle final reducer assembly attachment of LovoL 7 ton construction machinery wheel loader, which is composed of differential housing, half shaft gear, bevel gear, cross shaft, etc. For FL966 FL968 FL970 FL975 FL976 drive axle final drive reducer assembly accessories.Differential Assembly  ApplicationsThe differential assembly automatically adjusts the rotational speed of the wheels according to the different resistance encountered by each wheel.

Lovol Main Transmission AssemblyLovol main reduction is used for 5 ton Lovol drive axle series wheel loaders.

Lovol Wheel Reducer AssemblyThe wheel assembly of the loader provides high strength and durability to withstand the tremendous stress and impact of the loader during heavy work. Through gear transmission, the power is efficiently transmitted to the wheels, ensuring that the loader has a strong driving force in various road conditions, which can achieve flexible steering and make the loader operation more convenient.

Lovol 7Ton Ring Gear AssemblyThe 9G670 ring gear material is strong and durable, and can withstand huge impact and friction. It has strong wear resistance and good thermal stability. In the case of high temperature caused by long-term work of the loader, it can still maintain stable performance and is not easy to deform.Corporate ServicesWe have a professional logistics system, cooperate with a number of logistics, and have professionals to control every step from order to delivery to ensure that the goods can be delivered quickly and accurately to customers.

Lovol Drive Axle AssemblyLovol Heavy Industry's 7-ton front drive axle assembly is a high-quality, reliable loader component. It is precision engineered to deliver superior performance. It is made of durable materials that can withstand heavy loads and harsh road conditions. Advanced axle design ensures smooth power transmission and enhances vehicle traction and handling. It has a sturdy construction and has a long service life.

Lovol TeethLovol teeth are used in 5 ton loader buckets. It is suitable for Lovol's 5-ton full range of models and 5-ton Ensign series models. It has the characteristics of good wear resistance and long service life.Features:High-quality shovel teeth are usually subjected to a special heat treatment process to make them harder, more corrosion-resistant, more wear-resistant, and can be used for a long time in harsh working environments without excessive wear, reducing the frequency of tooth replacement and reducing the cost of use.

Lovol 5Ton Planetary Wheel Carrier AssemblyLovol 5Ton planetary wheel carrier assembly is an important part of the loader wheel side reducer assembly, which is composed of planetary wheel carrier, planetary wheel, planetary wheel axle (resized head, steel ball), planetary wheel gasket, etc. For Lovol 5 ton loader series.Product PerformanceThe planetary gear carrier assembly has a precise transmission ratio, which can efficiently transmit power and improve the work efficiency of the equipment.

Lovol Brake DiscsThe brake disc is an important part of the loader wheel reducer assembly, which interacts with the brake caliper to make the loader brake immediately when working.

Lovol Front Axle Housing Assembly 9H010-26A210000A0It is composed of front drive axle housing, front end shaft, brake caliper bracket, which is used for Lovol Heavy Industries wheel loader FL976 drive axle assembly, loader drive axle housing plays an indispensable role in the overall structure of the loader, it plays the role of supporting the loader load.

Lovol Brake Caliper9G670 brake caliper is an important part of wheel loader wheel reducer assembly. It is applied to 6 tons and 7 tons Lovol axle loader. The calipers are made of robust material and are able to withstand heavy use and frequent braking operations for a long service life.The Application Of The ProductBrake calipers provide a powerful and reliable braking force that can quickly bring the vehicle to a stop in a variety of operating conditions, ensuring safe operation.

Lovol Master And Driven Spiral Bevel GearIt is the front axle main reducer assembly component of the 6-ton and 7-ton Lovol FL968/FL970/FL975 wheel loaders. During operation, it can reduce the speed, increase torque, increase power and improve work efficiency.

Lovol Casing Nut9F662 locking nut is applied to the wheel reducer of Lovol loader. Its tight design can tightly fit with the threads of the half shaft sleeve and the output end of the transmission system, forming a good locking effect. During installation, special tools should be used to tighten according to the specified values to ensure that the locking nut can reliably fix the half shaft sleeve.Application Of The ProductThe main function of the locking nut is to fix and lock the half shaft sleeve. During the operation of the loader, it will withstand huge impact forces and torques.

Lovol 5Ton Main Reducer AssemblyLOVOL 9F662 main reducer assembly is used for wheel loaders FL955, FL956 drive axle accessories, angular nut, front axle flange assembly, LOVOL9F662 main reducer housing, JC differential assembly, main and slave bevel gear, bearing 31313 31314 guide bearing 142807Y and other parts.The Company’s Warehousing And Logistics StrengthThe company has experienced and well-trained professionals with clear division of labor and close cooperation and collaborative work in all links.

JC5TonDifferential AssemblyJC differential assembly is the internal part of the main transmission assembly of the loader, which is used in 5 ton Lovol bridge, JC bridge loader. The main function is to adjust the vehicle when turning, the left and right wheels rotate at different speeds, so as to ensure the stability and handling of the vehicle.Corporate ServicesWe are customer-centric and provide multi-faceted quality services. Professionals are ready to answer questions and deal with problems for customers to ensure that customer needs are responded to in a timely manner.

9G670-27A220008A0 Support SleeveThe support sleeve is an accessory of the Lovol 7Ton rear axle main reducer assembly. It is connected to the slewing frame, operates flexibly, supports the frame and drive axle, enables the loader to drive safely and stably under various road conditions, and plays a supporting role. The effect is continuous.9G670-27A220008A0 Support SleeveOur products provide best-in-class general overall performance and reliability. Products undergo strict first-class controls to ensure that each product meets excellent standards.

Lovol Loader End CapsThe 7-ton Lovol wheel end cover is a loader wheel side reducer assembly component. It helps maintain pressure balance inside the device and prevents too high or too low internal pressure from affecting the performance of the device. It can play a certain sealing role, prevent the leakage of lubricating oil and other liquids, and ensure the normal lubrication and operation of the equipment. It prevents dust, debris, etc.

Lovol Wheel Hub:The Lovol wheel hub is a component of the wheel side reducer assembly for the 7-ton Lovol wheel loaders FL968, FL975, FL976, and other drive axles. Original factory quality, matching host, efficient and durable.The wheel hub is tightly fastened to the drive shaft, with one end connected to the brake disc and the other end connected to the wheel reducer assembly. Ensure reduced vibration and shaking during driving, improve smoothness and handling, protect axles and related components, and reduce damage to internal components such as wheels and bearings from external impurities!