Rear Differential Assembly 9G670-manufacture,factory,supplier from China

9G670 Rear Differential Assembly:The 9G670 rear differential assembly is a component of the main reducer assembly of the Lovol 7-ton wheel loader. Used for the rear drive axle of FL968, FL970, FL975 and other models of loaders.The differential assembly is a planetary gear mechanism, which is connected by the differential housing, planetary gear shaft, and cross shaft. Located within the main transmission assembly of the wheel loader drive axle, it is fixedly connected to the driven spiral bevel gear of the main transmission.

Cross Shaft 9G670 The 9G670-26A224001A0 cross shaft is used as an accessory for the Lovol 7-ton front axle differential assembly. It fixes the bevel gear and gasket of the differential, making the internal structure of the differential more stable and flexible, and can adjust the rotation of the planetary gears according to changes in driving conditions.

9G670 Rear Main Subtractor AssemblyThe Lovol 7-ton main transmission assembly is used for the rear drive axle. The main transmission assembly increases torque by reducing the speed, allowing the loader to provide greater driving force during operation and adapt to various workloads.

9G670 Ring Gear Assembly:The 9G670 ring gear assembly 9G670-26A231003A1 is a component of the drive axle assembly for Lovol XCMG 7-ton wheel loader, used for FL966, FL968, FL970, FL976, XC972, XC975 and other loader drive axles.The ring gear is fixed to the wheel edge assemblies at both ends of the drive axle housing through half shaft splines. The power transmitted from the main transmission causes the planetary gears to roll along the fixed inner ring gear and drive the planetary carrier and drive wheels to rotate.

50M Differential AssemblyThe 50M differential assembly is a 5-ton wheel loader drive axle main transmission assembly component. It is composed of planetary gears, half-shaft gears, cross shafts and gaskets. High-quality differentials are wear-resistant, efficient, and have excellent performance.Product PerformanceLoader 50M differential assembly is widely used in loaders. Its excellent performance allows both wheels to rotate at different speeds, allowing the outside wheels to rotate faster than the inside wheels when the loader is turning, ensuring a smooth and flexible ride.

5Ton Meichi  Differential AssemblyXCMG Meichi 5Ton differential is used in the 5-ton loader XCMG axle Meichi final drive assembly. When the vehicle is cornering or when the wheels are driving in different road conditions, the differential allows the wheels to rotate at different speeds, thus ensuring that the vehicle can drive smoothly and avoid excessive tire wear.

7 Ton Swing FrameThe swing axle is applied to the 9G670 wheel loader, and the rear drive axle is installed on the swing frame, so that the rear axle can float up and down around the hinge point, and swing relative to the frame with the subframe pin as the axis. This is a measure of shock absorption and increasing the lateral stability of the loader. Effectively prevent damage to the loader frame and other critical components.

Yunyu 3Ton Rear Gear PairThe Gear Pair is a component of the main reducer assembly, mainly used for deceleration and power transmission. Crown teeth, also known as master slave drive bevel gears or differential active passive gears, are usually divided into active and passive parts. They achieve motion and power transmission between two intersecting shafts through meshing transmission.Company Service CapabilityCompany service personnel quickly allocate goods, inspect, package, and label based on customer order content.

XCMG differential assemblyThe differential assembly of XCMG loader is a very important transmission device, consisting of half shaft gears, planetary gears, cross shafts, differential housing, gaskets, etc. The differential assembly automatically distributes driving force through the relative rotation of internal and external gears, thereby reducing the speed difference between the wheels and preventing four-wheel slip.

Lovol Rear Axle Swing FrameThe rear axle of the Lovol loader is connected to the swing frame through a specific connection device, forming a stable connection structure When the loader travels on uneven roads, the force is transmitted to the rear axle through the wheels, and the rear axle will swing within the allowable range of the swing frame due to its connection with the swing frame At the same time, the swing frame also has a buffering effect, reducing vibration and wear on other components of the loader, and improving the service life of the loader.Company ServicesThe company has profess

JC5TonDifferential AssemblyJC differential assembly is the internal part of the main transmission assembly of the loader, which is used in 5 ton Lovol bridge, JC bridge loader. The main function is to adjust the vehicle when turning, the left and right wheels rotate at different speeds, so as to ensure the stability and handling of the vehicle.Corporate ServicesWe are customer-centric and provide multi-faceted quality services. Professionals are ready to answer questions and deal with problems for customers to ensure that customer needs are responded to in a timely manner.

Wheel Hub 9G670 The 7Ton Lovol wheel hub is a Lovol 9G670 series axle wheel reducer assembly component. It is used in Lovol FL968, FL970, FL976 and other models.Corporate Transport ServicesAccording to customer needs, the company adopts high-quality packaging materials to ensure that the goods are not damaged during transportation. At the same time, the company has established a perfect customer feedback mechanism to keep abreast of customers' opinions and suggestions on the delivery of goods, and continuously improve and enhance the quality of service.

7Ton Lovol Rear Main Reduction Spiral Bevel Gear Used for the main reducer assembly of the rear drive axle of FL968/FL970/FL975 Lovol wheel loader. The driven bevel gear is fixed on the differential assembly, and the driving bevel gear is fixed inside the main reducer. The driving bevel gear drives the driven bevel gear to operate and reduce speed. During the operation of the loader, it can reduce the speed, increase torque, improve work efficiency, and increase engine power.

LOVOL 7Ton Rear Axle Shaft9G670-27A210000A0 rear drive axle housing is used for wheel loading of FL970, FL975 and FL976. The transaxle housing using right-hand drive spiral bevel gear is a key component of the loader. It can withstand a variety of impacts and forces from the road surface and the loader itself. Its stiffness and strength are critical to the proper meshing of the final drive and differential gears. It is of great significance for the normal operation of axles and axles.

9G670-27A220008A0 Support SleeveThe support sleeve is an accessory of the Lovol 7Ton rear axle main reducer assembly. It is connected to the slewing frame, operates flexibly, supports the frame and drive axle, enables the loader to drive safely and stably under various road conditions, and plays a supporting role. The effect is continuous.9G670-27A220008A0 Support SleeveOur products provide best-in-class general overall performance and reliability. Products undergo strict first-class controls to ensure that each product meets excellent standards.

 Rear Main Reducer Flange Assembly 9G7Ton9G670-27A221000A0 (airfoil) flange assembly is used for FL968 FL970  loader rear main reducer assembly. The flange is connected to the loader frame or other fixed structures through bolts and other fasteners, thereby firmly fixing the main reducer assembly on the loader and ensuring smooth power transmission from the engine to the wheels and other drive components. At the same time, it has sufficient load-bearing capacity to ensure the stability and reliability of the main reducer assembly.

Yunyu 6-Ton Rear Main Reduction AssemblyThe main reducer components are slender and easy to connect and fix to the swing frame. It consists of wing flange assembly, Yunyu 60 reinforced differential assembly, main and auxiliary bevel gears, main reducer housing, locking nut, oil seal, bearings 31313, 31314, 32018X and other components.Assembly Process Of Yunyu 60 Main Reducer Assembly:1. Before assembling the main reducer assembly of Yunyu 60 model, thorough preparations should be made.

Yunyu 3Ton Differential AssemblyYunyu 3Ton differential assembly is an important part of the 3-ton wheel loader. It is used in the Yunyu 3Ton drive axle main reducer assembly. It can automatically adjust the speed difference between the left and right wheels according to different road conditions during the loader's driving to ensure smooth turning and good passability of the vehicle in complex terrain.The Application Of The ProductThe differential assembly has high reliability and durability, and can withstand the heavy working load of the loader.

Differential Bevel GearCone gears have advantages such as smooth transmission, high efficiency, and strong load-bearing capacity. The bevel gear is responsible for transmitting the power generated by the main reducer to the driving wheels on both sides. When the loader turns, the resistance faced by the left and right wheels is different. The planetary gears in the differential will achieve differential driving of the two wheels through a combination of rotation and revolution.

Differential Assembly Yunyu 6Ton (Ordinary Type)The loader differential assembly is a key component in the loader drive system, usually composed of differential housing, planetary gears, half shaft gears, cross shaft and other components. Its main function is to ensure that the inner and outer wheels of the loader can rotate at different speeds during turning, thereby achieving smooth steering.Working PrincipleWhen the loader turns, the resistance experienced by the inner and outer wheels is different.

XCMG Rear Axle Sun GearDA2210.1-2 has 35 keys inside the sun gear and 18 teeth outside the key. It is located in the center of the planetary wheel carrier assembly of XCMG rear drive axle, and is one of the core components of the wheel reducer.

7Ton Lovol Differential AssyThe differential assembly is the front drive axle final reducer assembly attachment of LovoL 7 ton construction machinery wheel loader, which is composed of differential housing, half shaft gear, bevel gear, cross shaft, etc. For FL966 FL968 FL970 FL975 FL976 drive axle final drive reducer assembly accessories.Differential Assembly  ApplicationsThe differential assembly automatically adjusts the rotational speed of the wheels according to the different resistance encountered by each wheel.

Differential Planet GearThe 7-ton planetary gear is a component of the differential assembly of the 7-ton Lovol drive axle main transmission assembly of the wheel loader. It is mainly used to balance and adjust the rotational speed of the left and right wheels during the operation of the loader, ensuring stable and flexible forward movement in various driving situations.Product PerformanceThe differential assembly consists of differential housing, planetary gears, planetary gear pads, and half shaft gears.

Differential Half Shaft GearThe differential half shaft gear transmits the torque generated by the engine to the driving wheels through the main reducer, differential, and half shaft, achieving deceleration and increasing torque to ensure the vehicle moves forward.